From prototypes to large quantities, equipped with tools for every situation, virtually indestructible and very easy to use — these are our Digibend horizontal press brakes.
Compact and powerful
Easy to install
Training in less than an hour
Ideal for prototyping
Effective with both small and large quantities
Expandable with many tools, even custom ones
The market evolves, technology advances, everything seems to change. But some tools you choose to carry with you forever. Our Digibend horizontal press just might be one of them.
This was one of the first bending machines we developed at Euromac. We have improved it over the years, and it is still one of our most popular products.
Our customers buy it, keep it and use it even for decades, because Digibend machines are practically indestructible.
But resilience is only one of the features that have enabled us to sell tens of thousands of Digibend horizontal hydraulic presses worldwide.
Using a Digibend horizontal press brake is simple. Really simple.
Technicians can learn how it works in just a few minutes.
This is the result of decades of evolution that have made Digibend more and more user-friendly with each version.
This is the result of the dedicated software, designed for easy, intuitive use and capable of visually assisting the operator during bending operations.
Compactness and speedy installation. This makes Digibend the only true plug & play horizontal hydraulic press on the market.
With its compact size, Digibend is extremely easy to move and place in any location.
Once the right position has been found, simply connect the power supply and Digibend is ready to start production.
What can you do with a Digibend? Practically everything.
Do you want to quickly create a prototype to show a customer? Digibend can do this.
Do you want to start high-volume production? Digibend can also do this.
Once the machining program is set up, Digibend guides the technician step by step to produce parts quickly and without sacrificing precision.
The versatility of Digibend also stems from the wide range of tools it can handle.
It currently has X [inserire attuale numero] different components capable of performing virtually any task required.
For more exotic applications, we at Euromac are happy to provide you with specifications so that you can make your own specific tool to install in the Digibend!
2 jaw bending tool with set of flanges
2 jaw bending tool with set of flanges for flat and shaped bars up to 90°.
Max 60 x 20 mm.
2 jaw bending tool
2 jaw bending tool for thick wall pipes from 3/8″ gas (17.2 mm) up to 2″ gas (60.3 mm) and round bars, up to 90°.
Rotary bending tool
Rotary bending tool for pipes, round and box tube, up to 180°. max Ø 50 mm.
Bending tool 30° with U shaped
Bending tool 30° with U shaped die for bending flat bars up to 30°.
Max. 16 x 200 mm.
Movable bending punch
Movable bending punch and fixed die for tight bends.
Shearing unit for flat bars
Shearing unit for flat bars.
Max 150 x 12 mm.
Straightening tool
Straightening tool for pipes, steel beams, flat bars etc. for precision and heavy straightening jobs.
Bending tool with pin Ø 30 mm
H=200 mm and antiflection bar.
Max 200 x 5 mm.
Bending tool with pin Ø 50 mm
H=200 mm, revolving pin single V die and antiflection bar. max. 200 x 8 mm.
Patent Pending.
Pin bending punch Ø 80 mm
Pin bending punch Ø 80 mm with antiflexion bar for bending a closed loop into thick wall bars.
Max 200 x 15 mm.
Punch and die H=400
Punch and die H=400 mm for bending plate sheets. Max. 400 x 4 mm.
Punching unit for holes up to Ø 30 mm.
Punching unit for holes up to Ø 30 mm.
Max thickness 12 mm.
4 jaw bending tool
4 jaw bending tool for round, square, rect. Bars and thick pipes up to 180°.
Max 100 x 20 mm or Ø 50 mm.
Revolving pin die
Tool single V die with revolving pin (mark-free bending) for thick plates.
Max 200 x 30 mm.
Die holder extension H.190
Pin for Promecam inserts D.80- H.350
Pin for Promecam inserts D.80- H.220
Promecam insert holder pin H. 220 mm
Profile holder pin D.80 Ext. – D.70 Int.
4 V die H.350 mm
Shapers for pipes
Ø 3/8” – 17,2 mm. Ø 1/2” – 21,3 mm. Ø 3/4” – 26,9 mm. Ø 1” – 33,7 mm. Ø 1 1/4” – 42,4 mm. (no per DIGIBEND 200)Ø 1 1/2” – 48,3 mm. (no per DIGIBEND 200)Ø 2” – 60,3 mm. (no per DIGIBEND 200) Shaper’s inside radius = 3 times the tube Ø (gas pipes)
Set of 2 flanges for flat bending
Set of 2 flanges for flat bending, c/w 4 inserts, thickness 4-5-6-8 mm.
I.R. 50 mm. with flange holder pin
Digibend 200 – 400 – 800
Four jaw pipe bending tool for thick pipes max Ø 60 mm
Four jaw pipe bending tool for thick pipes max Ø 60 mm
c/with movable part with four jaws & pin. Max. bending angle: 180°
(shapers not included)
Rotary bending tool for tubes of Ø max. 42,4 mm.
Rotary bending tool for tubes of Ø max. 42,4 mm. – R.C. max. 200 mm and profiles c/w rotary plate and tube rapid clamping (shapers not included)
Shapers for rotary bending tool
Ø 3/8” – 17.2 mm. – R. 53.5 mm.
Ø 1/2” – 21.3 mm. – R. 59 mm.
Ø 3/4” – 26.9 mm. – R. 78 mm.
Ø 1” – 33.7 mm. – R. 100 mm.
Ø 11/4”- 42.4 mm. – R. 157 mm.
Bending punches – Pin bending punch Ø 80
Pin bending punch Ø 80 – 90°- R. 5 – H. 220 mm
Bending punches – Pin Ø 80 completed with 3 inserts
Pin Ø 80 – H. 220 mm completed with 3 inserts
(R. 1,5 – 5 – 10)
Pin bending punch Ø 50 – L. 30 – H. 220 mm
L. 30 – H. 220 mm – 90°
(necessary to buy also:
adaptor code Z#BPT032
kit antiflection bar KAP-290
die holder ext. L. 85 mm Z#BMT201)
Pin bending punch Ø 50 – L. 50 – H. 220 mm
L. 50 – H. 220 mm – 90°
(necessary to buy also:
adaptor code Z#BPT032
kit antiflection bar KAP-290)
Adaptor for pin bending punches
Adaptor for pin bending punches
(codes Z#BPT035 & Z#BPT036)
Pin bending punch Ø 80 – L. 80 mm – 30° – R. 3 – H. 200 mm
Pin bending punch Ø 80 – L. 80 mm – 30° – R. 3 – H. 200 mm
Movable bending punch
Movable bending punch c/w 1 insert R. 3 – L. 200 mm
Grounded and hardened bending dies at 88° – 4 V die
16 – 22 – 35 – 50 mm. – H. 200 mm
Grounded and hardened bending dies at 88° – V die
V die 63 mm. – H. 200 mm
V die 80 mm. – H. 200 mm
V die 100 mm. – H. 200 mm
V die 125 mm. – H. 200 mm
V die 160 mm. – H. 200 mm
Single “U” dies for bends up to 30°
U die 50 mm. per pieghe 30°- H. 200 mm
U die 63 mm. per pieghe 30°- H. 200 mm
U die 80 mm. per pieghe 30°- H. 200 mm
Matrici a perni girevoli 88° specifiche per materiale tipo rame
Matrice con perni girevoli V 50 mm H.200 mm
Matrice con perni girevoli V 65 mm H.200 mm
Matrice con perni girevoli V 90 mm H.200 mm
Matrice con perni girevoli V 120 mm H.200 mm
Shearing tool c/w bar stop H. 150 mm
Shearing tool c/w bar stop H. 150 mm
with automatic blade adjustment
Max. thickness 12 mm
Punching unit for flat bars
Punching unit for flat bars for DIGIBEND 400 & 800
completed with extractor and adjustable bar holder
H. 100 mm. Max. Ø 30 mm for Geka type punches
(Punch type: PN5 /Die type: MN3 et 14)
To use this tool it is necessary to buy also:
– die holder extension Z#BMT195 (Only for DIGIBEND 800)
– pin bending punch Ø 80 mm – H. 220 Z#BPT033
(recommended for thick material)
Straightening tool H. 200 – Width 1200 mm
Straightening tool H. 200 – Width 1200 mm
c/w bending punch for DIGIBEND 800
Necessary to buy also Z#BPT033 & Z#BPT034
Two jaw pipe bending tool for thick pipes max Ø 60 mm
Two jaw pipe bending tool for thick pipes max Ø 60 mm
c/with movable part with two jaws & pin
Max. bending angle: 90° (shapers not included)
Backgauge kit L. 2000
Backgauge kit L. 2000
Backgauge kit L. 1250
Backgauge kit L. 1250
Kit antiflection bar l=847 mm for DIGIBEND 400
Necessary with punches Z#BPT035 & Z#BPT036
Recommended for bending thick layers.
Piegatura H. 350
Straightening tool H. 200 – Width 1000 mm
Straightening tool H. 200 – Width 1000 mm
c/w bending punch for DIGIBEND 400
Necessary to buy also Z#BPT033 & Z#BPT034
Kit antiflection bar l=1080 mm for DIGIBEND 800
Necessary with punches Z#BPT035 & Z#BPT036
Recommended for bending thick layers.
Two-hole-bending punch H. 200 mm
Two-hole-bending punch H. 200 mm
c/w 3 inserts (R. 3 – 6 – 10) for DIGIBEND 800
Single “U” dies for bends up to 30°
U die 50 mm. per pieghe 30°- H. 200 mm
U die 63 mm. per pieghe 30°- H. 200 mm
U die 80 mm. per pieghe 30°- H. 200 mm
